1
of
4
Loading...
LC200 Sequential LED Tail Lights
Direct fit — LandCruiser 200 Series (2016–2022 facelift)
GXL
VX
Sahara
Altitude
Not the 2007–2015 model — check your build date before ordering
Sequential turn signal — factory-style
Start-up animation — lights with parkers
Plugs straight into the factory harness
Loading dispatch status…
Not sure? Message us a photo — we’ll confirm before you order.
$499
$749
SAVE $250
AUD inc. GST · Sold as a matched pair (Left + Right)
12-Month Warranty
30-Day Returns
Message Us
Toyota LandCruiser 200 Series LED Tail Lights (2016–2022) – Plug &a...
Sale price
$499.00 AUD
Regular price
$749.00
Unit price
The 200 Series rear end.
Now it looks the part.
Now it looks the part.
A complete set of smoked LED tail lights for the 2016–2022 LandCruiser 200 Series facelift — all 4 pieces, inner and outer on both sides. Sequential indicators, start-up animation, full LED output. Plugs straight into your factory wiring — no cutting, no coding.
The kind of detail people actually notice
On an $80–100k vehicle, the factory rear end is the one part that still looks like 2007. Sequential LEDs and the start-up animation bring the back of the 200 Series in line with the rest of it — a 20-minute DIY job, and $250 off what these normally sell for.
What's in it
Sequential indicators
Turn signals sweep outward in a flowing LED sequence rather than a single flash — the same effect you see on high-end European vehicles, now on your LC200. A common upgrade across LC200, Hilux, Patrol and Ranger owners around Australia.
Start-up animation
Clean LED sweep runs when you switch the park lights on — the detail that makes the 200 Series look current, not 2007.
Full LED — brake, tail, reverse and indicators
Every light function across all 4 units runs LED, in a smoked lens that keeps the OEM profile — uses factory mounting points, no drilling. Brake lights illuminate faster than halogen. No bulbs to ever replace.
Built for LC200 electronics — plug in and it just works
Designed specifically for LC200 factory electronics. No resistors, no coding, no trips to the auto electrician. Complete set — all 4 pieces included, nothing else to buy.
Built to handle real Australian roads
Fully sealed housings against dust and moisture — built for corrugated tracks where vibration and water ingress are what actually wear cheap units down. UV-resistant lenses stay clear over time. Backed by a 12-month warranty and NSW-based support. If something ever needs sorting, we deal with it directly — not a freight forwarder overseas.
Installation — 20 to 30 minutes
All you need is a 10mm socket. Beginner friendly.
1
Remove the factory tail lights — unscrew and unplug each unit from the factory connector.
2
Plug the new units into the same factory wiring connectors — direct fit, no splicing.
3
Secure with factory mounting bolts. Repeat for all 4 units.
4
Test indicators, brake lights and reverse. Done.
Step-by-step install guide included. Message us anytime if you get stuck.
Confirmed fitment
✔ Direct fit — LandCruiser 200 Series (2016–2022 facelift)
GXL
VX
Sahara
Altitude
Facelift 2016+ model only — not compatible with the 2007–2015 pre-facelift LC200 (different housing shape — that's a separate product). Check your build date or compliance plate if unsure, or message us and we'll confirm before you order.
What's in the box — complete set, nothing else to buy
Left outer tail light
Right outer tail light
Left inner tail light
Right inner tail light
Wiring harness
Install guide
Common questions
Are sequential indicators legal in Australia?
Yes — sequential amber indicators are widely used across Australia, and thousands of LC200, Hilux, Patrol and Ranger owners run them daily. The turn signal function is identical to standard indicators, just displayed in a sweeping LED sequence. Roadworthy requirements can vary slightly by state, so if you have specific concerns, it's worth checking with your local vehicle standards authority.
Will I get canbus errors or hyperflash?
No — designed to work with the LC200 factory canbus without resistors. No dash warning lights, no hyperflash on the indicators. If you experience any issue after install, message us and we'll sort it immediately.
I tow a trailer — will this affect my trailer indicators?
Your trailer wiring connects to the factory trailer plug at the rear of the vehicle — separate from the tail light wiring. Replacing the tail lights doesn't affect the trailer wiring circuit. Trailer indicators will continue to operate normally.
Will this affect my Toyota warranty?
The install is fully reversible — original tail lights unplug and refit exactly as they were. A manufacturer generally can't void your whole vehicle warranty over an unrelated aftermarket part, but we're not lawyers and this isn't legal advice — if you're unsure, it's worth a quick check with your dealer.
Will these fit my 2007–2015 LC200?
No — this is for the 2016–2022 facelift model only. The pre-facelift LC200 (2007–2015) has a different housing shape. We have a separate product for that model. Check your compliance plate or message us and we'll point you to the right one.
Do I need an auto electrician to fit these?
No — all 4 units plug directly into your factory wiring connectors. 10mm socket, 20–30 minutes. If you can change a headlight globe you can install these. Step-by-step guide included.
What's the returns policy?
30-day returns on unused, unopened items — store credit issued. Faulty unit? We cover return shipping and replace or refund under the 12-month warranty. Full policy here.
Your purchase is protected
12-month warranty — we handle it, not a third party
30-day returns on unused items
Pre-tested before dispatch
5,500+ rigs upgraded, Aussie-owned
NSW-based team — message us anytime
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
