1
of
3
Loading...
LC200 Pre-Facelift Smoked LED Tail Lights
Full LED upgrade — all 4 pieces, plug-and-play, no cutting
Fits — LandCruiser 200 Series (2007–2015)
GXL
VX
Sahara
Altitude
Pre-facelift 2007–2015 only — not the 2016+ facelift, that’s a different product
Sequential indicators — sweeps outward
Start-up animation — lights with parkers
Complete 4-piece set — nothing else to buy
Loading dispatch status…
Not sure which series you’ve got? Message us your compliance plate photo — we’ll confirm before you order.
$549
$749
SAVE $200
AUD inc. GST · Complete set — all 4 pieces
12-Month Warranty
30-Day Returns
Message Us
Smoked LED Tail Lights Toyota LandCruiser 200 Series (2007–2015) Pl...
Sale price
$549.00 AUD
Regular price
$749.00
Unit price
The LC200 is one of the best 4WDs ever made.
Its tail lights are from 2007.
Its tail lights are from 2007.
A complete set of smoked LED tail lights for the 2007–2015 LandCruiser 200 Series — all 4 pieces, inner and outer on both sides. Sequential indicators, start-up animation, full LED output. Plugs straight into your factory wiring — no cutting, no coding.
Built to outlast the vehicle you're keeping
LC200 owners don't sell — if you're still driving yours in 2035, these lights will still look better than factory did on day one. The sequential LEDs and start-up animation are the single biggest visual upgrade you can make to the rear end without touching bodywork.
What's in it
Sequential indicators
Turn signals sweep outward in a flowing LED sequence rather than a single flash — a common upgrade across LC200, Hilux, Patrol and Ranger owners around Australia. Transforms the rear end in a way factory never could.
Start-up animation
Clean LED sweep runs when you switch the park lights on. On a 2007–2015 LC200 it's the detail that instantly shifts how the vehicle reads — feels current, not like it rolled off a 2007 production line.
Full LED across all 4 units
Brake, tail, reverse and indicators all LED, in a smoked lens that keeps a clean OEM+ look. Brighter, faster response, no bulbs to replace — inner and outer units both included on both sides.
Built for LC200 electronics — plug in and it just works
Designed for LC200 factory electronics. No resistors, no coding, no auto electrician. Complete set — nothing else to buy, uses factory mounting points.
Built for the long haul
Sealed housings resist dust and moisture — important on corrugated tracks where vibration and water ingress are what actually wear cheaper units down. UV-stable lenses stay clear in the Australian sun for years, not months. 12-month warranty from dispatch, backed by our NSW-based team. If something ever needs sorting, we deal with it directly.
Installation — 20 to 30 minutes
10mm socket and a screwdriver. Beginner friendly.
1
Remove the factory tail lights — unscrew and unplug each unit from the factory connector.
2
Plug the new units into the same factory wiring connectors — direct fit, no splicing.
3
Secure with factory mounting bolts. Repeat for all 4 units.
4
Test indicators, brake lights and reverse. Done.
Step-by-step guide included. Message us anytime if you need a hand.
Confirmed fitment
✔ Direct fit — LandCruiser 200 Series (2007–2015 pre-facelift)
GXL
VX
Sahara
Altitude
Pre-facelift 2007–2015 model only — not compatible with the 2016–2022 facelift LC200 (different housing shape — that's a separate product). Check your compliance plate if unsure, or message us and we'll confirm before you order.
What's in the box — complete set, nothing else to buy
Left outer tail light
Right outer tail light
Left inner tail light
Right inner tail light
Wiring harness
Install guide
Common questions
When will my order ship?
In stock and ready to go — orders placed before 3PM AEST ship the same business day. You'll receive a tracking notification via Australia Post the moment it ships.
Can I cancel or change my order?
Yes — message us as soon as possible, since most orders ship same-day. Once shipped, our standard 30-day return policy applies.
Are sequential indicators legal in Australia?
Yes — sequential amber indicators are widely used across Australia, and thousands of LC200, Hilux, Patrol and Ranger owners run them daily. The turn signal function is identical to standard indicators, just displayed in a sweeping LED sequence. Roadworthy requirements can vary slightly by state, so if you have specific concerns, it's worth checking with your local vehicle standards authority.
Will I get canbus errors or hyperflash?
No — designed for LC200 factory electronics without resistors. No dash warning lights, no hyperflash. If you experience any issue after install, message us and we'll sort it immediately.
I tow a trailer — will this affect my trailer indicators?
No — trailer wiring connects to the factory trailer plug, which is a separate circuit from the tail light wiring. Replacing the tail lights doesn't affect trailer indicator operation.
Will this affect my Toyota warranty?
The install is fully reversible — original tail lights unplug and refit exactly as they were. A manufacturer generally can't void your whole vehicle warranty over an unrelated aftermarket part, but we're not lawyers and this isn't legal advice — if you're unsure, it's worth a quick check with your dealer.
Will these fit my 2016–2022 LC200?
No — this is for the 2007–2015 pre-facelift model only. The facelift LC200 (2016–2022) has a different housing shape — that's a separate product. Check your compliance plate or message us and we'll confirm which one you need.
What's the returns policy?
30-day returns on unused, unopened items — store credit issued. Faulty unit? We cover return shipping and replace or refund under the 12-month warranty. Full policy here.
Your purchase is protected
12-month warranty from dispatch date
In stock — ships within 1 business day
30-day returns on unused items
5,500+ rigs upgraded, Aussie-owned
NSW-based team — message us anytime
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
