Your N70 is pushing 20 years old. These run animation most brand-new utes don't have.
Angular multi-bar LED housing, full LED brake/tail/reverse/indicator functions, and a start-up animation that runs every time your tail lights switch on — not just once, not on unlock. Factory plugs, factory mounts, under 30 minutes.
This is the angular, multi-bar version — a different housing shape entirely to our factory-style smoked option. Same factory connector, same two 10mm bolts per side as your original lights — nothing to wire, nothing to configure.
Direct fit — Toyota Hilux N70 (2005–2015)
WorkmateSRSR5TRD
Left + right pair included. Not sure about your exact build? Message us and we'll confirm before you order.
What Actually Matters Here
1
Start-up animation, every time the lights switch on
The tail/running LEDs run a startup sequence every time you turn on your headlights or running lights — not a one-off, not tied to unlocking the vehicle. Brake and indicators aren't part of the animation; they just work normally, brighter than factory.
2
Different housing to our factory-style option
This is the angular, multi-bar look — see the photos above for the shape. If you want the smoked-but-factory-look instead, we've got a separate listing for that.
Full LED, every function
Standard flash rate, built-in resistors
Waterproof, dust-sealed housing
Fitted in Your Driveway — 10mm Socket, 30 Minutes
1
Undo two 10mm bolts per side
Remove your factory tail lights.
2
Plug the factory connector into the new light
Direct fit, no adapters.
3
Bolt in, repeat on the other side
Animation runs every time the lights switch on.
A 10mm socket is all you need. Step-by-step guide included — message us if you want a hand.
Specs & What's Included
Mounting
Factory points, 2 bolts/side
Connector
Factory plug, direct fit
Functions
Brake, tail, reverse, indicator
Animation
Runs on every light-on, not unlock
Housing
Waterproof, dust-sealed
• Left tail light
• Right tail light
• Plug & play harness
• Step-by-step install guide
Common Questions
What does shipping cost?
Free tracked shipping via Australia Post — this qualifies under our standard free-shipping threshold for accessories over $200. Nothing extra to pay at checkout.
Does the animation work every time, or just on first install?
Every time the tail lights switch on — the running/tail LEDs run through a startup sequence each time the lights activate, whenever you turn on your headlights or running lights. Brake and indicators aren't part of the animation; they function normally.
Are the indicators sequential?
No — standard indicator flash, just brighter and sharper than factory halogens. This listing doesn't include a sequential indicator option.
Will the indicators flash at the right rate?
Yes — built-in resistors mean your blinkers flash at the standard factory rate. Nothing extra to wire in.
What if there's a problem?
12-month warranty covers defects, fogging and LED faults. Faulty unit? We cover return shipping and replace it. 30-day change-of-mind returns on unused items for store credit. Full policy here.
12-month warranty — defects, fogging, LED faults
30-day returns, store credit
Australian Consumer Law applies
5,500+ rigs upgraded, Aussie-owned
Please check your state and local vehicle regulations before fitting, as compliance requirements for lighting vary by region.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
✨
LED start-up animation
Tail lights run a startup sequence every time they switch on — a detail most new utes don't have.
🌑
Aggressive multi-bar LED design
Angular housing with a distinctive horizontal LED bar signature — looks nothing like factory, in the best way.
⚡
Instant-on braking
LEDs strike immediately — quicker than a halogen warming up. More time for the driver behind you to react.
🔌
Plug & play — 30 min
Factory plugs, factory mounting. 10mm socket. Both sides done in under 30 minutes, no workshop.
12-month warranty
30-day returns
Same-day dispatch
Aussie-owned, NSW-based
Your cart
Rugged Customs Automotive
Toyota Hilux N70 Smoked LED Tail Lights (2005–2015) | Start-Up Animation | Plug & Play Pair
Your N70 is pushing 20 years old. These run animation most brand-new utes don't have.
Angular multi-bar LED housing, full LED brake/tail/reverse/indicator functions, and a start-up animation that runs every time your tail lights switch on — not just once, not on unlock. Factory plugs, factory mounts, under 30 minutes.
This is the angular, multi-bar version — a different housing shape entirely to our factory-style smoked option. Same factory connector, same two 10mm bolts per side as your original lights — nothing to wire, nothing to configure.
Direct fit — Toyota Hilux N70 (2005–2015)
WorkmateSRSR5TRD
Left + right pair included. Not sure about your exact build? Message us and we'll confirm before you order.
What Actually Matters Here
1
Start-up animation, every time the lights switch on
The tail/running LEDs run a startup sequence every time you turn on your headlights or running lights — not a one-off, not tied to unlocking the vehicle. Brake and indicators aren't part of the animation; they just work normally, brighter than factory.
2
Different housing to our factory-style option
This is the angular, multi-bar look — see the photos above for the shape. If you want the smoked-but-factory-look instead, we've got a separate listing for that.
Full LED, every function
Standard flash rate, built-in resistors
Waterproof, dust-sealed housing
Fitted in Your Driveway — 10mm Socket, 30 Minutes
1
Undo two 10mm bolts per side
Remove your factory tail lights.
2
Plug the factory connector into the new light
Direct fit, no adapters.
3
Bolt in, repeat on the other side
Animation runs every time the lights switch on.
A 10mm socket is all you need. Step-by-step guide included — message us if you want a hand.
Specs & What's Included
Mounting
Factory points, 2 bolts/side
Connector
Factory plug, direct fit
Functions
Brake, tail, reverse, indicator
Animation
Runs on every light-on, not unlock
Housing
Waterproof, dust-sealed
• Left tail light
• Right tail light
• Plug & play harness
• Step-by-step install guide
Common Questions
What does shipping cost?
Free tracked shipping via Australia Post — this qualifies under our standard free-shipping threshold for accessories over $200. Nothing extra to pay at checkout.
Does the animation work every time, or just on first install?
Every time the tail lights switch on — the running/tail LEDs run through a startup sequence each time the lights activate, whenever you turn on your headlights or running lights. Brake and indicators aren't part of the animation; they function normally.
Are the indicators sequential?
No — standard indicator flash, just brighter and sharper than factory halogens. This listing doesn't include a sequential indicator option.
Will the indicators flash at the right rate?
Yes — built-in resistors mean your blinkers flash at the standard factory rate. Nothing extra to wire in.
What if there's a problem?
12-month warranty covers defects, fogging and LED faults. Faulty unit? We cover return shipping and replace it. 30-day change-of-mind returns on unused items for store credit. Full policy here.
12-month warranty — defects, fogging, LED faults
30-day returns, store credit
Australian Consumer Law applies
5,500+ rigs upgraded, Aussie-owned
Please check your state and local vehicle regulations before fitting, as compliance requirements for lighting vary by region.