1
of
3
Loading...
$100.00 off
LED Projector Headlights Ford Ranger PX2 PX3 & Everest (2015–2022) Sequential Plug & Play
Sale price
$799.00 AUD
Regular price
$899.00
Unit price
Sequential LED Projector Headlights — Ford Ranger PX2/PX3 & Everest
Direct fit — Ranger PX2 / PX3 & Everest (2015–2022)
Factory wiring harness · No dash errors
Sequential LED — fixes weak factory halogens
Plug & play — no dash errors, no coding
Left & right pair — bolts in around an hour
loading…
Choose your kit
Headlights Only
Projector pair + wiring harness. Bring your own H11 LED bulbs.
$799
Most popular
Complete Kit
Headlights + matched H11 LED bulbs — no guesswork.
$949
Not sure which kit? Message us — we’ll confirm before you order.
$949
AUD inc. GST
12-Month Warranty
30-Day Returns
Message Us
LED Projector Headlights Ford Ranger PX2 PX3 & Everest (2015–20...
Sale priceFrom
$799.00 AUD
Regular price
$899.00
Unit price
Sale price
$799.00 AUD
Regular price
$899.00
Unit price
Factory Ranger halogens are genuinely poor.
Weak low beam, flat throw, dim high beam — a known issue across the entire PX platform. These headlights replace the full unit: projector housings, crisp white DRLs, and integrated sequential indicators. Plug and play. No dash errors. No auto electrician.
Choose Your Kit
Headlights Only
The housing pair with wiring. Best if you already have H11 LED projector-spec bulbs or are sourcing your own.
Driver and passenger headlight assemblies
Integrated DRLs and sequential indicators
Wiring harness and PX2 DRL adapter
H11 LED projector bulbs not included
Most Popular
Complete Kit
Everything above plus a matched pair of H11 LED projector bulbs. Ready to bolt on and go.
Everything in the Headlights Only option
Matched H11 LED projector bulbs — tested for these housings
No sourcing bulbs separately
Note: The Headlights Only option does not include H11 bulbs. You must use H11 projector-spec LED bulbs — standard halogen H11s will not deliver the intended output. Select Complete Kit if you need bulbs supplied.
What You Get
Sequential Indicators — Dynamic Front Sweep
Amber LEDs flow outward across each headlight when signalling. Adds a sharp, modern look to the front of the Ranger.
Projector Beam — Cleaner Output Than Factory
Projector housings produce a focused, controlled beam with a defined cut-off line. Noticeably better throw than the flat factory reflector setup.
Plug and Play — Built-In CanBUS Decoders
Built-in CanBUS decoders keep your Ranger's dash clean after install — no error lights, no warning codes. PX3 and Everest connect directly. PX2 uses the included DRL adapter.
Right-Hand-Drive Beam Pattern
Designed for Australian RHD vehicles. Beam cut-off directed to avoid oncoming glare. Correct beam alignment is required after fitting.
Black Housing, White DRLs
Black internal housings, clear lens, crisp white daytime running lights. Looks factory-fitted, not aftermarket.
Installation
1
Remove the factory headlights using standard hand tools from the engine bay.
2
Disconnect the factory plugs and fit H11 LED projector bulbs into the new housings if you selected Headlights Only.
3
Connect and mount the new assemblies using the supplied wiring and factory mounting locations.
4
PX2 only: connect the included DRL adapter — clips in without cutting any wires, under 5 minutes.
5
Test all functions then align the beam adjusters before driving at night. Adjusters are built into the housing.
Allow around an hour. Basic hand tools only — no auto electrician needed.
Confirmed Fitment
Ford Ranger PX3 · 2018–2022DIRECT FIT
XL · XLS · XLT · FX4 · Wildtrak — factory-style connections, no modifications required.
Ford Everest · 2015–2022DIRECT FIT
All variants (Ambiente, Trend, Titanium) — factory-style connections, no modifications required.
Ford Ranger PX2 · 2015–2018DRL CONNECTION
XL · XLS · XLT · FX4 · Wildtrak — one DRL connection required using the included PX2 adapter. No cutting.
Does not fit: Ranger PX1 (pre-2015), 2022+ Next-Gen Ranger, or Ranger Raptor. Check your compliance plate before ordering.
Designed with a right-hand-drive beam cut-off. Output exceeds ADR minimum requirements. Correct beam alignment is required after installation.
What's in the Box
Both options include
1 × driver-side headlight assembly
1 × passenger-side headlight assembly
Plug-and-play wiring harness
PX2 DRL adapter
Complete Kit also includes
Matched pair of H11 LED projector bulbs
Built for Australian Conditions
Sealed HousingsDust and moisture resistant for outback tracks and wet weather.
UV-Stable LensesResist yellowing and cracking under prolonged Australian sun.
Vibration ResistantBuilt to handle corrugated roads and regular off-road use.
Beam Adjusters Built InSet beam height correctly after install — adjusters are part of the housing.
Common Questions
Will these cause a warning light on my dash?
No. Built-in CanBUS decoders prevent any error or warning light appearing on your Ranger's dash after install.
Do I need the Complete Kit?
If you don't already have H11 LED projector-spec bulbs, yes. The Headlights Only option does not include bulbs. You need H11 projector-spec LED bulbs — standard halogen H11s will not perform the same. Choose Complete Kit to have everything supplied.
Is this a pair or one headlight?
A complete driver and passenger pair is supplied in both options.
Does it fit my Wildtrak, XLT or XLS?
Yes. Fits all PX2 and PX3 Ranger variants — XL, XLS, XLT, FX4 and Wildtrak (2015–2022). Does not fit PX1, 2022+ Next-Gen Ranger, or Ranger Raptor.
Does the PX2 install differently?
The housings mount the same way, but the PX2 requires one additional DRL connection using the included adapter. Clips in without cutting wires, under 5 minutes.
Are these road legal?
The assemblies are designed with a right-hand-drive beam pattern and output exceeds ADR minimums. Correct beam alignment after fitting is essential. Roadworthy requirements vary by state — confirm with your local transport authority if required.
Do I need a professional to install these?
Most owners fit these themselves in around an hour with basic hand tools. If your Ranger has previously modified wiring, or you'd rather have a workshop handle the beam alignment, a professional install is a fine option too — either way works.
Delivery
Dispatch
Same day before 3PM AEST
Freight
Calculated at checkout
Tracking
Supplied after dispatch
Packaging
Packed for fragile freight
Trusted by 5,000+ Aussie 4WD owners
Rugged Customs Automotive is an Australian-owned business based in NSW. Plug-and-play upgrades for LandCruiser, Hilux, Patrol, Ranger and D-MAX — parts that fit, install easily, and hold up in Australian conditions. ABN 79 680 579 659.
Complete Your Ranger Build
Order with Confidence
12-month warranty against manufacturing defects.
Australian support for fitment and installation questions — before and after purchase.
30-day change-of-mind returns for unused items in original sealed packaging — store credit issued.
Australian Consumer Law rights apply to every purchase.
Freight is calculated at checkout — headlights are excluded from free shipping. Same-day dispatch on in-stock orders placed before 3PM AEST. Change-of-mind returns require items to be unused and in original sealed packaging. Warranty covers manufacturing defects and does not cover incorrect installation, impact damage, or vehicle wiring faults.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
