1
of
2
Loading...
NP300 Navara Smoked LED Tail Lights
Fits — NP300 Navara Dual-Cab (2015–2023)
Factory tub body only — uses factory mounts and wiring
Not suitable for tray-back conversions — different rear lighting
Full LED — brake, reverse, tail & indicators
Plug & play — factory wiring, no splicing
Built-in resistors — indicators flash at normal rate
Loading dispatch status…
12-Month Warranty
30-Day Returns
Not sure about your setup? Send us a photo of your rear end — we'll confirm the fit before you order.
$399
$525
SAVE $126
LEFT + RIGHT PAIR INCLUDED
AUD inc. GST · Insured freight, calculated at checkout
Nissan NP300 Navara Smoked LED Tail Lights (2015–2023) – Plug &...
Sale price
$399.00 AUD
Regular price
$525.00
Unit price
Factory Navara tail lights look tired by year two.
These don't.
These don't.
Faded halogen output, dull lenses, and a rear end that looks exactly like every other Navara on the road. These smoked full-LED tail lights bolt straight onto your factory mounts and wiring — brighter output, a sharper look, and a rear end that finally stands out.
The most-noticed exterior change you can make to an NP300.
Smoked lens, full LED across every function, factory plug and play wiring — twenty minutes with a 10mm socket, no workshop. Sealed housings built for towing and off-road use.
What you're getting
Smoked lens finish
A bold, premium dark look that lifts the whole rear end — the most-noticed exterior change you can make to an NP300.
Full LED output — brake, reverse, tail & indicator
All four functions run on LED — brighter and clearer than factory globes, with instant-on braking that's quicker than a halogen globe warming up.
Built-in resistors — no extra parts
Your indicators flash at the standard factory rate. Nothing extra to wire in, nothing to configure.
Plug and play — factory connector, no splicing
Same connector as your factory light. No splicing, no adapters, no coding. Sealed, shock-resistant housings built for towing and off-road use.
Installation — under 20 minutes
10mm socket. No coding, no splicing.
1
Open the tailgate, undo the two 10mm bolts and unclip the factory unit.
2
Factory connector plugs straight into the new unit — no splicing, no adapters.
3
Bolt in and repeat on the other side. Both sides done in under 20 minutes.
Step-by-step guide included. Message us if you get stuck at any point.
Confirmed fitment
✔ Nissan NP300 Navara Dual-Cab (2015–2023)
Uses factory mounts and wiring — direct bolt-in.
Not sure your setup matches? Send us a photo of your rear end and we'll confirm before you order.
What's in the box — nothing else to buy
Left + right smoked LED tail lights
Plug & play wiring connectors
Built-in indicator resistors
Printed install guide
Common questions
Will these fit my Navara?
They fit all NP300 dual-cab tub variants (2015–2023), bolting directly onto factory mounts and wiring. Send us a photo of your rear end if you're unsure — we'll confirm before you order.
Do the indicators work normally?
Resistors are built in, so your blinkers flash at the standard rate with nothing extra to wire — it's a straight plug-in.
Do I need any special tools?
Just a 10mm socket. Factory wiring and mounting — no coding, no splicing, no adapters. Most owners have both sides done in under 20 minutes.
What if there's a problem?
Covered by a 12-month warranty against defects, moisture and LED faults, plus 30-day change-of-mind returns on unused items. Faulty unit? We cover return shipping and replace it. Full policy here.
Your purchase is protected
12-month warranty against defects, moisture and LED faults
30-day change-of-mind returns on unused items
5,500+ rigs upgraded, Aussie-owned
Real Aussie support, no bots
Please check your state and local vehicle regulations before fitting, as compliance requirements for lighting vary by region.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
