Factory wiring connector · factory mounting bolts · no drilling · no wiring knowledge needed. Bolts straight in using your existing mounting points and plugs into your factory loom. Under 30 minutes.
📍 Tracked · Insured
🛡 12-Month Warranty
Suzuki Jimny LED Tail Lights (2018+) | Fits Ute Trays | Sequential ...
✔ Suzuki Jimny (2018+) — direct plug & play
Uses factory wiring connector and factory mounting bolts. No drilling, no wiring knowledge needed. Bolts straight in.
✔ Custom ute trays — steel, alloy, canopy builds
Mounts flat to tray surfaces using pre-installed rear studs. Standard 5-wire 12V loom, basic wiring knowledge required. Not designed for factory ute tub panels — see our vehicle-specific range if you have a standard tub.
Basic tray lights are an afterthought. These aren't.
Full LED tail lights built for the serious end of tray builds — sequential flowing indicators, start-up animation on every unlock, smoked OEM+ finish. The kind of detail that makes a built ute look like it was thought through properly rather than thrown together.
Two features you won't find on $150 tray lights.
Sequential flowing indicators that sweep outward across the light — the same effect you'd see on a late-model sports car or premium ute. And a start-up animation that runs every time you unlock the vehicle. Both are the reason tray builders who see these in person immediately want a set.
What you actually get
| ➡️ | Sequential flowing indicatorsNot a basic flash — a dynamic LED sequence that sweeps across the twin circular halo rings. Every time you indicate. The same flowing effect you'd see on a late-model prestige ute. The kind of detail that stops people at servo queues. |
| ✨ | Start-up animation on every unlockUnlock the ute and the twin circular halo rings cycle through a sequence before settling. The kind of thing people notice across a car park. Makes the whole rear end look deliberate — built, not bolted on. The detail that separates a serious build from a functional one. |
| 💡 | Full LED — brake, park, reverse and indicatorsEvery function is LED. Twin circular halo rings plus a horizontal running bar across the top — bright, instant-on response. No globes, no replacements, no failures from vibration on corrugated roads. |
| 🌑 | Smoked OEM+ finishClean smoked lens that matches the aesthetic of a serious build — not the yellow-tinted plasticky look of cheap tray lights. |
| 🇦🇺 | Built for actual Australian conditionsSealed housings, UV-stable lenses, vibration-resistant construction. Built to handle corrugated station tracks, river crossings and the heat cycles of a working ute — not just smooth suburban driveways. |
Dimensions & mounting
Not sure if these fit your tray's allotted space? Measure your current light recess or available mounting area and compare against the 330 × 110mm footprint. Live chat can help if you're unsure.
Wiring — standard 5-wire 12V
| 🟡 | Yellow | Indicator |
| 🔴 | Red | Brake |
| ⚪ | White | Reverse |
| 🔵 | Blue | Park / running |
| ⚫ | Black | Earth / ground |
Standard 5-wire configuration — matches the loom in most tray setups, trailer wiring and custom ute builds. Built-in resistors mean your indicators flash at the normal rate — no relay change, no extra parts needed. Basic wiring knowledge required. A full wiring guide is included. Some trays need holes drilled for mounting — that's normal for tray light installs. Mounting plate or bracket not included.
In the box
✔ Pre-installed rear mounting studs
✔ Full 5-wire wiring guide
Mounting plate or bracket not included — most tray builders already have this or source one to suit their specific setup.
Commonly installed on
The usual questions, answered straight
Please check your state and local vehicle regulations before fitting, as compliance requirements for custom vehicle builds and lighting vary by region.
Your tray build deserves a proper set of lights. These are them.
Sequential LED pair — start-up animation, full LED, built for the long haul.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
4,500+ happy customers across Australia.
Tray builders who upgraded from basic lights and never looked back.
What customers are saying
"Great quality and easy to install"
Really happy with the quality — looks great and the install was straightforward. Would definitely buy again.
— F***u, Australia
"Arrived very quickly and the installation was very easy"
Excellent experience from start to finish. Shipped fast, packaging was solid and the install was much easier than expected. Looks brilliant on the rear — really clean upgrade.
— M***a, Australia
"Very nice, good quality"
Good quality product — looks great installed. Happy with the purchase, would recommend to anyone looking to upgrade their tail lights.
— Australia
Complete the build
While you're upgrading the rear end, most customers also grab one of these.
Why Rugged Customs Automotive
| 🇦🇺 Aussie-Owned NSW-based, Aussie-owned. Real people, real support — not an overseas dropshipper. | 🔧 Tray Build Specialists We know tray builds. If you're unsure about fitment for your setup, chat with us before ordering. |
| 💬 24/7 Live Chat Before, during or after install — we're here. Wiring question at 9pm? We're on it. | 📦 Same-Day Dispatch Order before 3PM AEST and it ships today. Tracked via Australia Post. |
Not sure if these suit your setup? Ask us first.
Send a photo of your tray via live chat — we'll confirm fitment and wiring compatibility before you spend a cent.
30-day returns · 12-month warranty · Protected under Australian Consumer Law
