Sequential LED Tail Lights for Utes & Trays
- SequentialSweeping indicators
- Start-upAnimation on switch-on
- IP67 sealedFull LED, smoked lens
Sequential LED Tail Lights for Utes & Trays
For utes, trays, canopies and flat decks
Tray lights that sweep, not just blink.
Sequential indicators sweep across twin halo rings, and a start-up animation runs when the park lights come on.
Free shipping · Same-day dispatch from NSW · 12-month warranty
- Left and right pair
- Resistors built in
- Pre-wired leads
- 5 colour-coded wires
Four questions, answered
1. Does it fit?
Yes. Any 12V ute with a tray, canopy or flat deck.
- Steel tray
- Alloy tray
- Tray canopy
- Service body
- Flat deck
- Universal: the studs on the back bolt to a bracket made to suit your tray
- Any make or model, with a 330 × 110mm spot each side
- Not sure? Message us a photo of your tray and we’ll confirm the fit
2. Can I fit it myself?
Yes. Make a bracket to suit, bolt them up, then wire five colour-coded wires into your 12V loom.
- Studs are already fitted to the back of each light
- Colour-coded wiring guide in the box
- Leads can be extended to suit any tray length
3. Will it suit my wiring?
Yes. Resistors are built in, so no hyperflash and no relay.
- One wire each for indicator, brake, reverse, park/tail and earth
- Reverse is built into each light
4. How do they look?
Smoked and clean, with no reflector panel breaking up the lens.
- Dark smoked lens for a stealth look when they’re off
- Sequential indicators sweep across twin halo rings, with a start-up animation when the park lights come on
- Pair them with your tray’s red reflectors, or add a set if your old lights had them built in
In the box
- Left and right lights
- Pre-wired 5-wire leads
- Studs and hardware
- Colour-coded wiring guide
Fit them in 3 steps
- 1Mount themMake a bracket to suit your tray, then bolt each light on with the studs on the back
- 2Wire them upFive colour-coded wires into your 12V loom, colours below
- 3Test themSwitch the park lights on and watch the start-up animation, then check brake, indicators and reverse
You’ll need: a bracket to suit your tray, spanners, crimp connectors and heat shrink.
- Stuck mid-job? Message us a photo and we’ll talk you through it
- Rather have it done? Your local auto electrician can wire them up
Why buy from us?
- In stock in NSW, same-day dispatch on orders before 3PM on business days
- 12-month warranty, plus your consumer law rights
- An Australian business that answers when you message
- 6,000+ customers, 4.9 store rating
Questions
Delivery?
Order before 3PM Sydney time on a business day and it ships the same day, free by AusPost. Recent orders to NSW and QLD have taken 3 to 6 business days; allow a little longer elsewhere and longest for WA and the NT.
Are they waterproof?
Yes. The housing is sealed to IP67: dust-tight and rated for temporary immersion. Full LED throughout.
Bright enough in daylight?
Yes. Bright LEDs on every function, so brake and indicators stand out day or night.
Running a 24V truck?
These are 12V, made for utes, so they don’t suit 24V trucks.
Are they ADR approved?
No. They’re sold as aftermarket lights and don’t carry ADR approval markings. Rules for modified vehicles vary by state, so check with your state road authority if you’re unsure.
Got a factory tub?
These surface-mount to trays, canopies and decks. For a straight swap into your factory tub’s tail light housing, see our vehicle-specific tail lights.
Specifications?
Returns?
Faulty: covered by the warranty and we pay return freight. Change of mind: unused and unopened, within 30 days of delivery, for 30-Day Store Credit. Full policy.
Same-day dispatch before 3PM · 12-month warranty · 30-Day Store Credit · Free shipping from NSW
Get the pairPayment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
