$499.00 AUD $749.00
Universal LED Tail Lights for Custom Utes & Trays | Sequential LED | Plug-In Wiring
4.9 / 5
⭐ Best Seller
4,500+ Aussie customers
In Stock — Order before 3PM AEST for same-day dispatch
12-Month Warranty
Same-Day Dispatch
30-Day Returns
Full LED — brake, park, reverse and indicators. Standard 5-wire loom
Sealed, UV-stable, vibration-resistant — built for real conditions
Tray builds only. Steel trays, alloy trays, canopy builds, custom bars — not designed to clip into factory ute tub panels. See our vehicle-specific range if you have a factory tub.
$499.00
AUD inc. GST · Left + right pair
🚚 Same-day before 3PM
📍 Tracked · Insured
🛡 12-Month Warranty

📋 Important — read before ordering

These are designed for tray-back builds only — steel trays, alloy trays, canopy builds and custom rear bars. They mount to flat surfaces or brackets. They are not designed to clip into factory tub body panels on standard utes. If your ute has a factory tub, see our vehicle-specific tail light range instead.

Basic tray lights are an afterthought. These aren't.

Sequential flowing indicators, LED start-up animation on every unlock, smoked modern styling. A proper upgrade that makes your tray look like it belongs on a serious build.

What makes them different

➡️ Sequential flowing indicators Not a basic flash — a flowing LED sweep that runs across the light from inside out. Looks the part, functions properly.
LED start-up animation on every unlock Every time you unlock the vehicle, the lights run through a sequence. Makes the whole rear end look intentional and built — not just bolted on.
💡 Full LED — brake, park, reverse & indicators All functions are LED. Bright, fast response, long life. No globes to replace — ever.
🖤 Smoked modern styling Smoked lens with a clean OEM+ look. Matches the style of serious tray builds without looking like an afterthought add-on.
🇦🇺 Built for harsh Aussie conditions Sealed housings, UV-stable lenses, vibration-resistant construction. Built for corrugated roads, hot climates and dusty conditions — not just smooth driveways.

Size & fitment

Width 33cm — standard tray light width Height 11cm
Mounting Rear studs pre-installed, flat surface or bracket Wiring Standard 5-wire, 12V system
✔ COMMONLY INSTALLED ON
✔ LandCruiser trays
✔ Hilux trays
✔ Patrol trays
✔ Ranger trays
✔ Amarok trays
✔ Custom canopy builds
✔ Most 12V ute tray setups

Not sure if these fit your tray? Send us a photo via live chat and we'll confirm before you order.

Wiring — standard 5-wire 12V

🟡 Yellow — indicator
🔴 Red — brake
⚪ White — reverse
🔵 Blue — park
⚫ Black — ground

Uses the standard 5-wire configuration found on tray wiring looms, trailer setups and custom ute wiring. Basic wiring knowledge required. Full wiring guide included. Some trays may require drilling holes or using a mounting plate — normal for tray light installs. Mounting plate or bracket not included.

What's in the box

✔ 2 × LED tail lights (left + right)
✔ Pre-installed mounting studs
✔ Wiring guide
✔ Install instructions

Mounting plate or bracket not included — most tray builders already have this or source it to suit their specific setup.

Common questions

Will these fit my factory ute tub?

No — these are designed for tray-back builds only (steel trays, alloy trays, canopy builds, custom bars). They are not designed to clip into factory tub body panels. For factory tub fitment, see our vehicle-specific tail light range.

Do I need to drill holes to mount these?

Some trays will need holes drilled — this is normal for tray light installs. Rear mounting studs are pre-installed on the lights. If your tray already has light mounting points in the right position, no drilling is needed. Not sure? Send us a photo and we'll advise.

Do I need an electrician to wire these?

Basic wiring knowledge is sufficient — you need to be comfortable connecting 5 wires to your existing tray loom. The full wiring guide is included and identifies each wire function. If you're not confident, a sparky can do it in under 30 minutes.

What's your returns policy?

30-day change-of-mind returns on unused, unopened items — store credit issued. Faulty item? We cover return shipping under the 12-month warranty. Full policy here.

🛡 YOUR PURCHASE IS PROTECTED
✔ 12-month warranty on all units
✔ 30-day change-of-mind returns on unused items
✔ Faulty item? We cover return shipping
✔ Protected under Australian Consumer Law
✔ NSW-based Aussie business — real support

Delivery

📦 Same-day dispatch on orders placed before 3PM AEST
🚀 Metro: 2–5 business days · Regional: 3–7 business days
🔍 Tracking included on every order via Australia Post

Your tray build deserves a proper set of lights.

In stock now — order before 3PM and it ships today.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

4,500+ happy customers across Australia.

Tray builders who upgraded from basic lights and never looked back.

What customers are saying

★★★★★ Verified Buyer 🇦🇺

"Great quality and easy to install"

Really happy with the quality — looks great and the install was straightforward. Would definitely buy again.

— F***u, Australia

★★★★★ Verified Buyer 🇦🇺

"Arrived very quickly and the installation was very easy"

Excellent experience from start to finish. Shipped fast, packaging was solid and the install was much easier than expected. Looks brilliant on the rear — really clean upgrade.

— M***a, Australia

★★★★★ Verified Buyer 🇦🇺

"Very nice, good quality"

Good quality product — looks great installed. Happy with the purchase, would recommend to anyone looking to upgrade their tail lights.

— Australia

Complete the build

While you're upgrading the rear end, most customers also grab one of these.

⭐ Most Popular Lighting Upgrade
Bi-LED Projector Headlights — LandCruiser 70 Series Match the sequential rear end with an upgraded front. Up to 3× brighter than factory halogen, integrated DRL, direct H4 plug-in. Complete the exterior transformation front to back.
$1,195 $1,345 View Product
Premium Bonnet Strut Kit While you're working on the vehicle, ditch the bonnet prop rod permanently. Vehicle-specific gas struts, installs in under 30 minutes. From $85.
From $85 $115 View Product

Why Rugged Customs Automotive

🇦🇺 Aussie-Owned NSW-based, Aussie-owned. Real people, real support — not an overseas dropshipper. 🔧 Tray Build Specialists We know tray builds. If you're unsure about fitment for your setup, chat with us before ordering.
💬 24/7 Live Chat Before, during or after install — we're here. Wiring question at 9pm? We're on it. 📦 Same-Day Dispatch Order before 3PM AEST and it ships today. Tracked via Australia Post.

Not sure if these suit your setup? Ask us first.

Send a photo of your tray via live chat — we'll confirm fitment and wiring compatibility before you spend a cent.

30-day returns  ·  12-month warranty  ·  Protected under Australian Consumer Law

Rugged Customs Automotive

Universal LED Tail Lights for Custom Utes & Trays | Sequential LED | Plug-In Wiring

$499.00 AUD $749.00

📋 Important — read before ordering

These are designed for tray-back builds only — steel trays, alloy trays, canopy builds and custom rear bars. They mount to flat surfaces or brackets. They are not designed to clip into factory tub body panels on standard utes. If your ute has a factory tub, see our vehicle-specific tail light range instead.

Basic tray lights are an afterthought. These aren't.

Sequential flowing indicators, LED start-up animation on every unlock, smoked modern styling. A proper upgrade that makes your tray look like it belongs on a serious build.

What makes them different

➡️ Sequential flowing indicators Not a basic flash — a flowing LED sweep that runs across the light from inside out. Looks the part, functions properly.
LED start-up animation on every unlock Every time you unlock the vehicle, the lights run through a sequence. Makes the whole rear end look intentional and built — not just bolted on.
💡 Full LED — brake, park, reverse & indicators All functions are LED. Bright, fast response, long life. No globes to replace — ever.
🖤 Smoked modern styling Smoked lens with a clean OEM+ look. Matches the style of serious tray builds without looking like an afterthought add-on.
🇦🇺 Built for harsh Aussie conditions Sealed housings, UV-stable lenses, vibration-resistant construction. Built for corrugated roads, hot climates and dusty conditions — not just smooth driveways.

Size & fitment

Width 33cm — standard tray light width Height 11cm
Mounting Rear studs pre-installed, flat surface or bracket Wiring Standard 5-wire, 12V system
✔ COMMONLY INSTALLED ON
✔ LandCruiser trays
✔ Hilux trays
✔ Patrol trays
✔ Ranger trays
✔ Amarok trays
✔ Custom canopy builds
✔ Most 12V ute tray setups

Not sure if these fit your tray? Send us a photo via live chat and we'll confirm before you order.

Wiring — standard 5-wire 12V

🟡 Yellow — indicator
🔴 Red — brake
⚪ White — reverse
🔵 Blue — park
⚫ Black — ground

Uses the standard 5-wire configuration found on tray wiring looms, trailer setups and custom ute wiring. Basic wiring knowledge required. Full wiring guide included. Some trays may require drilling holes or using a mounting plate — normal for tray light installs. Mounting plate or bracket not included.

What's in the box

✔ 2 × LED tail lights (left + right)
✔ Pre-installed mounting studs
✔ Wiring guide
✔ Install instructions

Mounting plate or bracket not included — most tray builders already have this or source it to suit their specific setup.

Common questions

Will these fit my factory ute tub?

No — these are designed for tray-back builds only (steel trays, alloy trays, canopy builds, custom bars). They are not designed to clip into factory tub body panels. For factory tub fitment, see our vehicle-specific tail light range.

Do I need to drill holes to mount these?

Some trays will need holes drilled — this is normal for tray light installs. Rear mounting studs are pre-installed on the lights. If your tray already has light mounting points in the right position, no drilling is needed. Not sure? Send us a photo and we'll advise.

Do I need an electrician to wire these?

Basic wiring knowledge is sufficient — you need to be comfortable connecting 5 wires to your existing tray loom. The full wiring guide is included and identifies each wire function. If you're not confident, a sparky can do it in under 30 minutes.

What's your returns policy?

30-day change-of-mind returns on unused, unopened items — store credit issued. Faulty item? We cover return shipping under the 12-month warranty. Full policy here.

🛡 YOUR PURCHASE IS PROTECTED
✔ 12-month warranty on all units
✔ 30-day change-of-mind returns on unused items
✔ Faulty item? We cover return shipping
✔ Protected under Australian Consumer Law
✔ NSW-based Aussie business — real support

Delivery

📦 Same-day dispatch on orders placed before 3PM AEST
🚀 Metro: 2–5 business days · Regional: 3–7 business days
🔍 Tracking included on every order via Australia Post

Your tray build deserves a proper set of lights.

In stock now — order before 3PM and it ships today.

View product